How to set up a bird scare cannon
Good placement matters as much as the right model. This guide summarises the basic steps for positioning a bird scare cannon safely and effectively in the field.
Compare the models
Choose the right spot
Set the device up on flat, firm and open ground. Make sure there are no tall obstacles in front of it and no flammable material around it.
Install the device at a safe distance from people, animals, homes and roads. Always follow the product manual for installation and gas connection.
Keep birds from getting used to it
Birds can adapt to predictable sounds over time. The steps below help reduce this effect.
- Move the device every few days.
- Change the direction of the sound with the TRP01 rotating tripod.
- Use the TMR01 timer or an electronic model to run the device only when birds are active.
- Use the device only during the critical period of the crop.
- Check the gas hose regularly; where rodents are present, do not leave the hose exposed.
Using the cannon together with other methods, such as visual deterrents, helps delay habituation.
Frequently asked questions
Can I leave the device in the same place all the time?
It is not recommended. A fixed position and fixed interval speed up habituation; move the device regularly.
Where should the gas cylinder go?
Stand the cylinder upright on firm ground and connect it as described in the product manual. Choose a spot with easy access to the cylinder.
Will it disturb my neighbours?
A bird scare cannon is loud. Install it away from homes, avoid running it at night and follow local regulations.